The main things to know about fixed MPS format are that it is column oriented (as opposed to entering the model as equations), and everything (variables, rows, etc.) gets a name. MPS is an old format, so it is set up as though you were using punch cards, and is not free format. Fields start in column 2, 5, 15, 25, 40 and 50. Sections of an MPS file are marked by so-called header cards, which are distinguished by their starting in column 1. Although it is typical to use upper-case throughout the file (like I said, MPS has long historical roots), many MPS-readers will accept mixed-case for anything except the header cards, and some allow mixed-case anywhere. The names that you choose for the individual entities (constraints or variables) are not important to the solver; you should pick names that are meaningful to you, or will be easy for a post-processing code to read. Here is a little sample model written in MPS format (explained in more detail below): NAME TESTPROB ROWS N COST L LIM1 G LIM2 E MYEQN COLUMNS XONE COST 1 LIM1 1 XONE LIM2 1 YTWO COST 4 LIM1 1 YTWO MYEQN -1 ZTHREE COST 9 LIM2 1 ZTHREE MYEQN 1 RHS RHS1 LIM1 5 LIM2 10 RHS1 MYEQN 7 BOUNDS UP BND1 XONE 4 LO BND1 YTWO -1 UP BND1 YTWO 1 ENDATA For comparison, here is the same model written out in lp-format: min: +XONE +4 YTWO +9 ZTHREE; LIM1: +XONE +YTWO <= 5; LIM2: +XONE +ZTHREE >= 10; MYEQN: -YTWO +ZTHREE = 7; XONE <= 4; YTWO >= -1; YTWO <= 1; Strangely, there is nothing in MPS format that specifies the direction of optimisation. And there really is no standard "default" direction; some LP codes will maximize if you don't specify otherwise, others will minimize, and still others put safety first and have no default and require you to specify it somewhere in a control program or by a calling parameter. If you have a model formulated for minimization and the code you are using insists on maximization (or vice versa), it may be easy to convert: just multiply all the coefficients in your objective function by (-1). The optimal value of the objective function will then be the negative of the true value, but the values of the variables themselves will be correct. Any line with an asterisk (*) in Column 1 is treated as a comment. The eight character names used to specify variables, constraints and other entities are fixed format. Names are not automatically justified, so blanks are treated just like other characters. For example "ROW1 " is not the same as " ROW1 ". (Note that some optimisers do not permit blanks in names.) No case conversion is performed, so "row1 " is different from "ROW1 ". Floating point numbers may be specified in free format within the 12 character field (including embedded blanks). The following list describes the possible ways of writing a number. Mantissa: + or - optional sign character (no sign indicates a positive number) digits optional integer part of the mantissa . optional decimal point (if not present, a decimal point will be assumed after the mantissa digit) digits optional fraction part of the mantissa -the mantissa must contain at least one digit Exponent (optional): D or E exponent leader + or - optional exponent sign digits exponent digits Numbers with an absolute value greater than 1010 or less than 10-10 are rejected. The NAME card can have anything you want, starting in column 15. The ROWS section defines the names of all the constraints; entries in column 2 or 3 are E for equality rows, L for less-than ( <= ) rows, G for greater-than ( >= ) rows, and N for non-constraining rows (the first of which would be interpreted as the objective function). The order of the rows named in this section is unimportant. The largest part of the file is in the COLUMNS section, which is the place where the entries of the A-matrix are put. All entries for a given column must be placed consecutively, although within a column the order of the entries (rows) is irrelevant. Rows not mentioned for a column are implied to have a coefficient of zero. The RHS section allows one or more right-hand-side vectors to be defined; most people don't bother having more than one. In the above example, the name of the RHS vector is RHS1, and has non-zero values in all 3 of the constraint rows of the problem. Rows not mentioned in an RHS vector would be assumed to have a right-hand-side of zero. The optional BOUNDS section lets you put lower and upper bounds on individual variables (no * wild cards, unfortunately), instead of having to define extra rows in the matrix. All the bounds that have a given name in column 5 are taken together as a set. Variables not mentioned in a given BOUNDS set are taken to be non-negative (lower bound zero, no upper bound). A bound of type UP means an upper bound is applied to the variable. A bound of type LO means a lower bound is applied. A bound type of FX ("fixed") means that the variable has upper and lower bounds equal to a single value. A bound type of FR ("free") means the variable has neither lower nor upper bounds. There is another optional section called RANGES that I won't go into here. The final card must be ENDATA, and yes, it is spelled funny. ========================================================================== MPS input format was originally introduced by IBM to express linear and integer programs in a standard way. The format is a fixed column format, so care must be taken that all information is placed in the correct columns as described below. The following is not intended as a complete description of MPS format, but only as a brief introduction. For more information, the reader is directed to: "Advanced Linear Programming," by Bruce A. Murtagh "Computer Solutions of Linear Programs," by J.L. Nazareth It may be useful to look at an example MPS file while reading this MPS information. The following template is a guide for the use of MPS format: --------------------------------------------------------------------- Field: 1 2 3 4 5 6 Columns: 2-3 5-12 15-22 25-36 40-47 50-61 NAME problem name ROWS type name COLUMNS column row value row value name name name RHS rhs row value row value name name name RANGES range row value row value name name name BOUNDS type bound column value name name SOS type CaseName SOSName SOSpriority CaseName VarName1 VarWeight1 CaseName VarName2 VarWeight2 CaseName VarNameN VarWeightN ENDATA --------------------------------------------------------------------- NOTES: A. In the ROWS section, each row of the constraint matrix must have a row type and a row name specified. The code for indicating row type is as follows: type meaning --------------------------- E equality L less than or equal G greater than or equal N objective N no restriction B. In the COLUMNS section, the names of the variables are defined along with the coefficients of the objective and all the nonzero constraint matrix elements. It is not necessary to specify columns for slack or surplus variables as this is taken care of automatically. C. The RHS section contains information for the right-hand side of the problem. D. The RANGES section is for constraints of the form: h <= constraint <= u . The range of the constraint is r = u - h . The value of r is specified in the RANGES section, and the value of u or h is specified in the RHS section. If b is the value entered in the RHS section, and r is the value entered in the RANGES section, then u and h are thus defined: row type sign of r h u ---------------------------------------------- G + or - b b + |r| L + or - b - |r| b E + b b + |r| E - b - |r| b E. In the BOUNDS section, bounds on the variables are specified. When bounds are not indicated, the default bounds ( 0 <= x < infinity ) are assumed. The code for indicating bound type is as follows: type meaning --------------------------------------------------- LO lower bound b <= x (< +inf) UP upper bound (0 <=) x <= b FX fixed variable x = b FR free variable -inf < x < +inf MI lower bound -inf -inf < x (<= 0) PL upper bound +inf (0 <=) x < +inf BV binary variable x = 0 or 1 LI integer variable b <= x (< +inf) UI integer variable (0 <=) x <= b SC semi-cont variable x = 0 or l <= x <= b l is the lower bound on the variable If none set then defaults to 1 F. Sections RANGES and BOUNDS are optional as are the fields 5 and 6. Everything else is required. In regards to fields 5 and 6, consider the following 2 constraints: const1: 2x + 3y <= 6 const2: 5x + 8y <= 20 Two ways to enter the variable x in the COLUMNS section are: (Field: 2 3 4 5 6 ) 1. x const1 2.0 const2 5.0 2. x const1 2.0 x const2 5.0 G. A mixed integer program requires the specification of which variables are required to be integer. Markers are used to indicate the start and end of a group of integer variables. The start marker has its name in field 2, 'MARKER' in field 3, and 'INTORG' in field 5. The end marker has its name in field 2, 'MARKER' in field 3, and 'INTEND' in field 5. These markers are placed in the COLUMNS section. H. A specially ordered set of degree N is a collection of variables where at most N variables may be non-zero. The non-zero variables must be contiguous (neighbours) sorted by the ascending value of their respective unique weights. In lp_solve, specially ordered sets may be of any cardinal type 1, 2, and higher, and may be overlapping. The number of variables in the set must be equal to, or exceed the cardinal SOS order. Below is a representation of a SOS in an MPS file, where each SOS is defined in its own SOS section, which should follow the BOUNDS section. 0 1 2 3 4 1234567890123456789012345678901234567890 SOS Sx CaseName SOSName. SOSpriority. CaseName VarName1 VarWeight1.. CaseName VarName2 VarWeight2.. CaseName VarNameN VarWeightN.. x at the second line, position 3, defines is the order of the SOS. Due to limitations in the MPS format, N is restricted to the 1..9 range. Each SOS should be given a unique name, SOSName. lp_solve does not currently use case names for SOS'es and the CaseName could be any non-empty value. The SOSpriority value determines the order in which multiple SOS'es are analysed in lp_solve. See also Interpolation with GAMS.
NAME SOS2test ROWS N obj L c1 L c2 E c3 COLUMNS x1 obj -1 c1 -1 x1 c2 1 x2 obj -2 c1 1 x2 c2 -3 c3 1 x3 obj -3 c1 1 x3 c2 1 x4 obj -1 c1 10 x4 c3 -3.5 x5 obj 0 RHS rhs c1 30 c2 30 BOUNDS UP BOUND x1 40 LI BOUND x4 2 UI BOUND x4 3 SOS S2 SET SOS2 10 SET x1 10000 SET x2 20000 SET x4 40000 SET x5 50000 ENDATA
The free format is very similar to the fixed MPS format, but it is less restrictive e.g. it allows longer names. Also some implementations allow more than 12 positions to specify the values. The fields do not have fixed column positions as in the fixed MPS format. They may be written anywhere except column 1, with each field separated from the next by one or more blanks. However, they must appear in the same sequence as in fixed format.
There is one important limitation compared to the fixed MPS format: names may not contain blanks.
Also note that there is no real standard for the free format. Each implementer has its own implementation and interpretation of the free format ... Some allow one space in the name, some require that names must take at least 8 positions (and thus extended with spaces). Some allow to have more than 6 fields on a line. lp_solve only reads the first 6 fields and ignores the rest.
lp_solve tries to handle all possible free formats. The only real limitation is that there may be no blanks in names and only 6 fields per line may be used. When lp_solve writes an mps file in free format, it will be the same as for fixed format, except if names are longer than 8 characters. In that case all data is shifted to the right.
Several solvers have added a 'standard' to the free MPS format to allow to specify the objective direction.
This via the new optional section OBJSENSE. Below this section, there may be one line that specifies the objective direction.
This in field 1 of this line via the following possible keywords: MAXIMIZE, MAX, MINIMIZE, MIN. If the section
is not specified, then lp_solve assumes minimization, just like the fixed MPS format.
This section should be before the ROWS section.
NAME TESTPROB OBJSENSE MAX ROWS N COST L LIM1 G LIM2 E MYEQN COLUMNS XONE COST 1 LIM1 1 XONE LIM2 1 YTWO COST 4 LIM1 1 YTWO MYEQN -1 ZTHREE COST 9 LIM2 1 ZTHREE MYEQN 1 RHS RHS1 LIM1 5 LIM2 10 RHS1 MYEQN 7 BOUNDS UP BND1 XONE 4 LO BND1 YTWO -1 UP BND1 YTWO 1 ENDATA
The lp_solve free MPS reader recognises and interprets all possible OBJSENSE direction values. When a free MPS file is created, the OBJSENSE section will only be written when the direction is maximization. This because minimization is by default assumed and to stay as compatible as possible with other solvers.
Several solvers have added a 'standard' to the free MPS format to allow to specify the objective row.
By default the first "N" row defined in the ROWS section becomes a problem's objective; a different objective may be
specified in the optional OBJNAME section, which contains exactly one data line that names the objective in field 1.
This section should be before the ROWS section.
NAME TESTPROB OBJNAME PROFIT ROWS N COST N PROFIT L LIM1 G LIM2 E MYEQN COLUMNS XONE COST -1 PROFIT 1 XONE LIM1 1 LIM2 1 YTWO COST -4 PROFIT 4 YTWO LIM1 1 MYEQN -1 ZTHREE COST -9 PROFIT 9 ZTHREE LIM2 1 MYEQN 1 RHS RHS1 LIM1 5 LIM2 10 RHS1 MYEQN 7 BOUNDS UP BND1 XONE 4 LO BND1 YTWO -1 UP BND1 YTWO 1 ENDATA
The lp_solve free MPS reader recognises and interprets this OBJNAME section and uses the objective name specified here. Other "N" cards in the ROWS section are then ignored. Note that if there is no OBJNAME section that, just like in the fixed MPS format, the first "N" card from the rows section is then taken and all other "N" cards are ignored. When a free MPS file is created, the OBJNAME section will never be created since lp_solve always only has one objective function in memory.